Home

What Will That Fridge Cost to Run at Your Electric Rate?

Start with the yellow label

In a U.S. appliance showroom, the most useful number to take home from the refrigerator door is the one marked estimated yearly electricity use. It’s on the yellow EnergyGuide label, below the more prominent dollar figure. Take a photo of the whole label for each fridge on your shortlist. With those photos and a recent electric bill, you can price both fridges at the rate you actually pay.

You may also see an ENERGY STAR mark on the door or on the label itself. As the FTC’s guide to appliance labels explains, the yellow EnergyGuide label gives you an estimate of annual operating cost and a basis for comparing similar models. The ENERGY STAR mark identifies a model that meets the program’s energy-efficiency criteria. A fridge can carry both because they tell you different things.

The certification can help you narrow the field. Once you’re choosing between models, though, the mark alone won’t tell you which will cost less to run in your kitchen. Keep the model number in each photo so you can match the electricity estimate to the exact fridge, even if several finishes or configurations look alike on the sales floor.

Read the small print under the dollar figure

Find the yearly electricity use, expressed in kilowatt-hours (kWh), and the electricity price used to calculate the label’s cost estimate. A kilowatt-hour is a unit of energy, the same unit that appears on your electric bill. The yearly kWh figure comes from standardized testing. That matters in a showroom: the models have been assessed under common test conditions, rather than in households with different habits.

The arithmetic behind the large dollar figure is yearly kWh multiplied by the label’s reference price per kWh. The result covers an estimated year of electricity to run the appliance. It leaves out the purchase price. It also doesn’t promise that your utility bill will go up by that amount when the refrigerator is plugged in.

In particular, if you’re replacing a working fridge, you’re already paying for refrigeration. The new model’s annual cost is useful for budgeting, but it isn’t the change you should expect on your bill. To estimate savings from retiring the old fridge, you’d also need a reasonable estimate of what that fridge uses. To choose between two new fridges, you can work directly from their labels.

Check which fridges share the scale

Before judging the arrow on the yellow cost scale, read the description of the models included in the range. Look for the refrigerator type and the capacity range. The scale is handy if you already know what size and style you want: it shows how the model compares with the other fridges in that group.

A large refrigerator near the low-cost end of its scale can still use more electricity than a smaller refrigerator near the high-cost end of a different scale. Each arrow shows a position within its own group. Neither arrow tells you how far the other fridge would move your meter.

If both fridges fit the opening and provide the storage you need, put their yearly kWh figures side by side. The lower figure means less electricity under the test conditions. This comparison also works when the small print on the two labels shows different reference electricity prices. Subtracting the printed dollar amounts in that case would mix a difference in energy use with a difference in price.

Put your own electricity price to work

For a flat-rate electric plan, look at the charges on your bill that vary with the number of kWh you buy. Electricity supply and delivery may appear on separate lines. If both are billed per kWh, add their per-kWh prices. Leave out a fixed monthly customer charge: you’ll owe it whichever refrigerator you choose. Dividing the entire bill, fixed charge included, by your kWh would assign some of that unavoidable fee to the fridge.

Use dollars per kWh for the multiplication; if the bill quotes cents, convert to dollars first. Following the Department of Energy’s appliance cost calculation, multiply annual electricity use in kWh by the price per kWh to estimate annual operating cost. Use the same household price for each fridge and keep the annual kWh alongside the result so you can redo the calculation if your rate changes.

These figures are illustrative. Suppose two fridges that fit the same space are rated at 400 and 500 kWh per year, and your flat rate is $0.20 per kWh. The first costs an estimated 400 × $0.20 = $80 per year to run. The second comes to 500 × $0.20 = $100 per year. Choosing the first saves an estimated $20 per year at that rate.

You can also get the difference directly: the second fridge uses an extra 100 kWh per year under the test conditions. At $0.20 for each of those kWh, that’s the same $20 annual difference. If the lower-use fridge costs $60 more to buy, it would take about three years of those electricity savings to cover the extra purchase cost, assuming the rate and the difference in use hold steady.

Know when the estimate gets less precise

A fridge in a warmer spot may use more electricity to keep its contents cold; ENERGY STAR’s refrigerator guidance recommends placing it away from heat sources such as an oven or direct sunlight. That’s a change on the kWh side of the calculation. A utility rate increase works on the price side: the very same yearly kWh can cost more without any change in how the fridge runs.

On a time-of-use plan, the missing detail is when the fridge uses its electricity. The annual kWh on the label won’t tell you how much falls within your utility’s peak hours. Simply averaging peak and off-peak prices would assume an equal share of the electricity was bought at each price.

For a useful range, multiply the label’s annual kWh by your lowest off-peak per-kWh price. Then multiply the same annual kWh by your highest peak price. Those endpoints show what the estimated electricity use would cost if it were all billed at either extreme. The fridge will use electricity across billing periods, so treat the range as bounds for the stated kWh and rates. A closer estimate requires a breakdown of the fridge’s use during the hours each rate applies.

Paula Fairchild

Paula Fairchild writes about heat pumps, gas furnaces, attic insulation and public energy efficiency programmes. When comparing heating options, she sets out the fuel prices and efficiency assumptions behind each estimate. She uses agency guidance and equipment specifications to distinguish a figure on a rating sheet from a likely cost on a bill.